大家都在搜: vns85978威尼斯城官网-威尼斯城所有登入网址输送带 威尼斯城所有登入网址输送带 流水输送带 同步带 橡胶输送带

当前位置: vns85978威尼斯城官网 - 资讯中心 > 行业百科 > 行业百科


来源: 时间:2021-09-16 19:54:32 浏览次数:
During transportation and storage, the food conveyor belt shall be kept clean, avoid direct sunlight or rain and snow, prevent contact with acids, alkali oils, organic solvents and other substances, and be one meter away from the heating device.
贮存时仓库内温度宜保持 -18℃ - 40℃ 之间,相对温度宜保持在50-80%RH之间。贮存期间,产品需成卷放置,不得折叠,放置期间应每季翻动一次。不同类型、规格层数的输送带不宜接在一起使用,其接头更好采用胶接法。
During storage, the temperature in the warehouse should be kept between - 18 ℃ - 40 ℃, and the relative temperature should be kept between 50-80% RH. During storage, the product shall be placed in rolls and shall not be folded. During storage, it shall be turned once a quarter. Conveyor belts of different types, specifications and layers should not be connected together, and their joints should preferably be bonded.
The type, structure, specification and number of layers of conveyor belt shall be reasonably selected according to the service conditions. Generally, the running speed of the conveyor belt should not be higher than 2.5m/s. Low speed should be used as far as possible for materials with large block and high wear and the use of fixed plow unloading device. The diameter of the transmission drum of the conveyor and the relationship between the cloth layer of the conveyor belt, the matching of the recitation drum and the redirection drum, and the requirements for the idler groove angle shall be reasonably selected according to the design regulations of the conveyor.
The feeding direction shall be along the running direction of the belt. In order to reduce the impact on the belt when the material falls, a chute shall be used to reduce the falling distance of the material; The distance between idlers shall be shortened and buffer idlers shall be used in the material receiving section of the belt. In order to prevent material leakage, a soft and appropriate baffle plate shall be used on the belt side to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
Precautions for use:
(1) 避免托辊被物料覆盖,造成回转不灵,防止漏料卡于滚筒与胶带之间,注意活动部分的润滑,但不得油污输送带;
(1) Prevent the idler from being covered by materials, resulting in poor rotation, prevent material leakage from being stuck between the drum and the belt, and pay attention to the lubrication of the moving part, but do not oil the conveyor belt;
(2) Avoid starting with load;
(3) If the tape deviates, measures shall be taken to correct it in time;
(4) In case of local operation of the tape, it shall be repaired in time to avoid expansion;
(5) Prevent the tape from being blocked by frame, pillar or block materials to prevent it from breaking and tearing.





XML 地图 | Sitemap 地图